Bootmod3 FLEXFUEL KIT - HIGH FLOW.

We are proud to bring to market this truly amazing product that allows you to install the necessary Flex Fuel hardware on your BMW and A9X Supra with incredible ease and minimal effort, right in your own driveway.

Our kit is fully plug & play with the factory harness. No cutting or splicing of OEM wiring/connectors. It installs in minutes and can be removed without a trace left on the car!

Our team used SolidWorks to design a Flow Optimized Flex Fuel Sensor Adapter (FFSA) to ensure that fuel flow is unobstructed and without any additional pressure drop at full fuel pump flow from the fuel tank to your engine when our kit is installed. This is important when utilizing the factory fuel system with all the power that Ethanol can provide over gasoline!

The flex fuel sensor housing is designed to neatly install in place of the factory BMW fuel hat.

The Flex fuel sensor adapter also includes two 1/8 NPT ports for the installation of an additional fuel pressure sensor for vehicles that do not have an OEM from the factory for future use. Depending on fitment, either port can be utilized.

Install the bootmod3 Flex Fuel Plug and Play Kit and flash your flex fuel enabled bootmod3 OTS MultiMap or Custom Map in minutes and you're off to the races never worrying about alcohol / gasoline mix % in your fuel tank. It doesn't get better or easier than this!

bootmod3 FlexFuel Plug and Play Kit:

• Minutes to install at home instead of hours at a shop with car on a lift to cut/splice into factory fuel lines and solder/cut/splice into OEM electrics.
• 4+ hours of time/cost savings to get started with Flex Fuel compared to most other kits requiring custom fuel lines, fittings and custom wiring!
  
• Fully reversible/removable and back to stock without a trace in minutes
  
• 3-piece Aluminum-6061 Flex Fuel sensor adapter with built-in sensor bypass for an obstruction-free fuel flow, made to fit into the vehicle's factory fuel hat under the rear seat
  
• All connection points sealed with fuel-safe Viton o-rings
  
• Flex fuel sensor adapter housing provides additional 1/8 NPT ports for optional fuel pressure sensor addition to vehicles without factory sensor for bootmod3 CustomROM v2 support
  
• CANBUS-enabled Ethanol Content Analyzer (ECA) that integrates with bootmod3 CustomROM for a complete and seamless conversion of your BMW FlexFuel for bootmod3 Flex Fuel enabled OTS MultiMaps and custom tunes with your bootmod3 tuner of choice
  
• Power/CANBus 4-wire plug and play harness
  
• 100% Full Plug and Play harness to the BMW Fuel Controller connectors (EKP3) on S55, N55 vehicles
  
• 100% Plug & Play harness to the BMW Body Domain Controller (BDC/FEM) connector on Gen1 F-series B48/B58
  
• Continental Flex Fuel sensor 3-wire harness
  
• Custom Aluminum-6061 CANBus housing for the bootmod3 ECA board
  
• Custom, kink-free teflon braided line for plug and play installation with the OEM fuel hat and factory 5/16“ or 3/8” fuel feed line. No cutting or new lines required.
  
• -6 AN fitting from Racetronix
  CLICK HERE for bootmod3 Flex Fuel installation instructions on the bootmod3 WiKi

OEM FUEL HAT LOCATION KIT IS INTENDED FOR OEM FUEL PUMP AND ASSOCIATED WIRING. VARIATIONS IN FUEL LINES OR FUEL PUMPS MAY NOT BE COMPATIBLE. PLEASE USE THE ENGINE BAY INSTALLATION KIT IF AVAILABLE INSTEAD.

Delivery time: 3-5 business days